Procedure: Enable AutoLogon in Windows XP
Note: This procedure will most likely work on Windows 2000, but it has not been tested as of 11-09-2007.

1. Click Start -> Run.
2. Enter "control userpasswords2" as the command line; Press ENTER.
3. A dialog box should appear; With the checkbox next to the following text UNCHECKED, highlight the user you wish to autologon:
   "Users must enter a user name and password to use this computer. "
4. Click "OK."
5. A second smaller dialog box will open for you to enter and confirm the password for the selected user.
6. Reboot the computer to apply & test the new settings.

< Back to The Basement